lava-users

lava-users@lists.lavasoftware.org

3 participants
927 discussions

by Stevan Radaković

Hello community, With the LAVA release of 2020.02 we now have a REST API framework that we fell covers all the functionalities of the already existing XMLRPC API. Since the long-term plan is to drop the XMLRPC support, we now encourage everyone to use REST and we also would like to hear feedback about any additional features that you'd like to see as part of the REST API. Our plan is to slowly move lavacli <https://docs.lavasoftware.org/lavacli/> project to use REST API … [View More]

5 years, 3 months

Reboot inside test

by Ilya Fedusiv

Hi, lava team! First question: I'm working with fastboot device, is it possible after test part put device again to fastboot mode, run some fastboot command ( not to flash ), boot again, run test. job steps: 1. deploy lxc 2. boot lxc 3. test lxc 4. deploy fastboot ( put to fastboot ) 5. boot fastboot device 6. run test 7. reboot and put device to fastboot mode 8. run fastboot commands 9. continue run test. Can you give any advice how to do it? Better to able reboot … [View More]

5 years, 4 months

Use user commands

by Ilya Fedusiv

Hi, Lava Team! Want to use user_commands as written here : https://validation.linaro.org/static/docs/v2/actions-command.html Device dictionary has : {% set user_commands = {'switch_mode' : {'do': './usr/local/scripts/switch_mode.sh'}} %} Job https://pastebin.com/hhWbC207 I have lxc and custom script to set device flash-mode. But have error error_msg: 'common' is a reserved namespace that should not be present with other namespaces To fix it I added namespace to command: - command: … [View More]

5 years, 4 months

Using "command" actions in multinode jobs

by Ryan Harkin

Hi LAVA folks, I'm trying to create a multinode job based on iperf.yaml: https://github.com/Linaro/test-definitions/blob/master/automated/linux/iper… (note, this iperf.sh test doesn't actually work as intended, but that's a problem I'm debugging). The full job definition is at the bottom of this email. Anyway, I'm adding my own deploy and boot sections, as per working single node jobs. However, my deploy uses "command" actions, like this: - command: role: - host … [View More] - guest namespace: dfu-firmware name: set_boot_to_nand These give error messages like this: Invalid definition: extra keys not allowed @ data['actions'][1]['command']['role'] And if I remove the "role" settings, I get a different error: Valid definition with warnings: Every action of a multinode job should have roles So it seems like I'm in a loop. Any suggestions?? Thanks, Ryan. ------------------------------------------------------ JOB DEFINITION ------------------------------------------------------ job_name: lces2-iperf timeouts: job: minutes: 60 action: minutes: 3 connection: minutes: 5 priority: medium visibility: public metadata: iperf-version: v3 protocols: lava-multinode: roles: host: device_type: rzn1d count: 1 timeout: minutes: 30 guest: device_type: rzn1d count: 1 timeout: minutes: 30 actions: #################### # Deploy QSPI images #################### - deploy: role: - host - guest namespace: dfu-firmware to: tmpfs images: sf_fsbl: image_arg: --alt sf_fsbl --download {sf_fsbl} url: https://snapshots.linaro.org/openembedded/schneider/linaro-warrior-4.9/rzn1… sf_trustedfw: image_arg: --alt sf_trustedfw --download {sf_trustedfw} url: https://snapshots.linaro.org/openembedded/schneider/linaro-warrior-4.9/rzn1… sf_uboot0: image_arg: --alt sf_uboot0 --download {sf_uboot0} url: https://snapshots.linaro.org/openembedded/schneider/linaro-warrior-4.9/rzn1… sf_uboot1: image_arg: --alt sf_uboot1 --download {sf_uboot1} url: https://snapshots.linaro.org/openembedded/schneider/linaro-warrior-4.9/rzn1… - command: namespace: dfu-firmware role: - host - guest name: set_boot_to_nand - boot: namespace: dfu-firmware role: - host - guest method: dfu timeout: minutes: 10 - command: namespace: test role: - host - guest name: set_boot_to_qspi ############### # TFTP/NFS ############### - deploy: namespace: test-nfs role: - host - guest timeout: minutes: 5 to: tftp os: oe kernel: url: https://snapshots.linaro.org/openembedded/schneider/linaro-warrior-4.9/rzn1… type: zimage dtb: url: https://snapshots.linaro.org/openembedded/schneider/linaro-warrior-4.9/rzn1… nfsrootfs: url: https://snapshots.linaro.org/openembedded/schneider/linaro-warrior-4.9/rzn1… compression: bz2 - boot: namespace: test-nfs role: - host - guest connection-namespace: dfu-firmware timeout: minutes: 20 method: u-boot commands: - setenv autoload no - dhcp - dhcp - env print - setenv serverip {SERVER_IP} - tftp {KERNEL_ADDR} {KERNEL} - tftp {DTB_ADDR} {DTB} - setenv bootargs 'console=ttyS0,115200n8 root=/dev/nfs rw nfsroot={NFS_SERVER_IP}:{NFSROOTFS},tcp,hard,intr,vers=3 rootwait coherent_pool=2M ip=dhcp' - '{BOOTX}' auto_login: login_prompt: 'login:' username: root prompts: - 'root@snarc-soca9:' - 'root@rzn1-snarc:' - test: namespace: test-nfs role: - host timeout: minutes: 30 definitions: - repository: metadata: format: Lava-Test Test Definition 1.0 name: run-iperf3-server description: "Run iperf3 in server mode" run: steps: - apt-get -y update - apt-get -y install iperf3 - if iperf3 -s -D; then lava-test-case run-iperf3-server --result 'pass'; else lava-test-raise 'Failed to run ipef3 server'; fi - lava-send server-ready ipaddr=$(lava-echo-ipv4 eth0) - lava-wait client-done - pkill iperf3 from: inline name: run-iperf3-server path: inline/run-iperf3-server.yaml - test: namespace: test-nfs role: - guest timeout: minutes: 30 definitions: - repository: https://git.linaro.org/people/chase.qi/test-definitions.git from: git path: automated/linux/iperf/iperf.yaml name: iperf3-test parameters: SERVER: lava-host-role # The MSG ID and KEY should be the same as the ones sent by lava-send above MSG_ID: server-ready MSG_KEY: ipaddr [View Less]

5 years, 4 months

Re: [Lava-users] Unable to boot target via ipxe using nfs and tftp protocol via lava-docker container

by admirer mishra

Hi, I found the solution, we have to mount dispatcher.yaml file from lava-server in lava-master container as well beacuse lava-master is the one who communicate with DUT and run the job. regards admirer mishra

5 years, 4 months

Re: [Lava-users] Unable to boot target via ipxe using nfs and tftp protocol via lava-docker container

by admirer mishra

Hi Stevan, I am using latest lava-docker containers 2020.01 so using rest api I set the dispatcher ip and post it, which creates a dispatcher.yaml file with the content dispatcher_ip: '141.64.81.191' (not my ip) I checked it's there in the directory (/etc/lava-server/dispatcher.d/lava-dispatcher/dispatcher.yaml), but still no change in SERVER_IP or NFS_SERVER_IP (everything is same) while running the job, due to which not able to do tftp. I even tried with restarting the lava-server but still … [View More]

5 years, 4 months

Unable to boot target via ipxe using nfs and tftp protocol via lava-docker container

by admirer mishra

Hi there, Yesterday, while going through the mail, I found about the docker-compose file provided by lava. The script is amazing it gives even more understanding of how actual lava-server and dispatcher work. I am a complete beginner just working on lava and docker from last 20 days. So, I am trying to boot a x86 device via ipxe using nfs and tftp protocol. In normal lava server running on host everything works fine because the host ip and target ip are on same local network so tftp and nfs … [View More]

5 years, 4 months

Lava Dispatcher Docker container tftp issue

by ROSHAN KUMAR

Hi, I am using the docker-compose file provided by lava community. I don't understand why there is a separate tftpd container and also how my device who is on host local network will communicate with it. Also same things I don't understand for nfs container. Please let me know Thanks and regards ROSHAN KUMAR

5 years, 4 months

Lava Server Docker container not working as Dispatcher

by ROSHAN KUMAR

Hi, I created a lava server docker container on amd64 machine using lavasoftware/lava-server docker image present on docker hub. But after running the container I didn't find any Dispatcher online except lava-logs. Did the current version of lava server docker container doesn't work as dispatcher similar to normal lava server. Please let me know. Thanks and regards ROSHAN KUMAR

5 years, 4 months

Mix device's type

by Ilya Fedusiv

Hi! I want to mix two flashing types for device : fastboot and custom ( run custom script ) I already did both types separately using deploy methods : fastboot and flasher How I can mix both types? And in web gui in device panel what does mean that error? Configuration Error: missing or invalid template. Jobs requesting this device type (mix-type) will not be able to start until a template is available on the master. Best regards, Ilya

5 years, 4 months

← Newer
1
...
28
29
30
31
32
33
34
...
93
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

lava-users