lava-users

lava-users@lists.lavasoftware.org

3 participants
925 discussions

by dhanu msys

Hi Team, How can i deploy RTOS based Application Image on target. Notes : Target HW : STM32F429I-DISC1. RTOS : Open source RTOS Application Image (RTOS + Application specific code). We are able to flash the Developed Application Firmware (.out/.bin) through IAR IDE via USB, so we are in plan to make use of LAVA and run test applications automatically. So , Can you please provide some references to deploy this test scenarios in LAVA. Thanks & Regards, Dhanunjaya. P

5 years, 6 months

Re: [Lava-users] None of the deployment strategies accepted your deployment parameters

by dhanu msys

Hi Milosz, Thanks for providing the document references. I will try my level best. Thanks & Regards, Dhanunjaya On Tue, Nov 12, 2019, 20:36 Milosz Wasilewski <milosz.wasilewski(a)linaro.org> wrote: > I'll defer you to the docs: > - boot commands: > https://master.lavasoftware.org/static/docs/v2/actions-boot.html#index-9 > - device type: > > https://master.lavasoftware.org/static/docs/v2/devicetypes.html#device-types > - u-boot bootloader: > https://master.lavasoftware.org/static/docs/v2/actions-boot.html#index-35 > > I didn't test tftp booting with this board, so I can't help. It should > work as this is supported in device type: > > https://git.lavasoftware.org/lava/lava/blob/master/etc/dispatcher-config/de… > > Good luck. > > milosz > > On Tue, 12 Nov 2019 at 13:59, dhanu msys <dhanuskd.palnati(a)gmail.com> > wrote: > > > > Hi Milosz, > > > > I was running tftp on my localhost & kept those uImage & dtb files in > the "tftpboot" repository. PFA. > > > > > > Thanks & Regards, > > Dhanunjaya. P > > > > > > On Tue, Nov 12, 2019 at 7:23 PM dhanu msys <dhanuskd.palnati(a)gmail.com> > wrote: > >> > >> Hi Milosz, > >> > >> Yes , I have booted my board manually using the tftp , here i have > attached those uImage & dtb images. PFA. > >> Once the device bootsup , through command prompt , i will set the > following commands. > >> > >> setenv ipaddr 192.168.1.201 > >> setenv gatewayip 192.168.1.200 > >> setenv serverip 192.168.1.200 > >> setenv netmask 255.255.255.0 > >> tftpboot 0xc2000000 uImage > >> tftpboot 0xc4000000 stm32mp157c-ev1.dtb > >> setenv bootargs 'root=/dev/mmcblk0p6 rootwait rw > console=ttySTM0,115200'bootm 0xc2000000 - 0xc4000000 > >> > >> Its basically ARM architecture based and bootloader "u-boot". > >> > >> Can you please suggest how i can deploy the tftp files through LAVA > test job ,what will be the url i need pass in the job definition ? > >> > >> Thanks & Regards, > >> Dhanunjaya. P > >> > >> > >> On Tue, Nov 12, 2019 at 7:07 PM Milosz Wasilewski < > milosz.wasilewski(a)linaro.org> wrote: > >>> > >>> Hmm, > >>> Do you know how tftp boot works? Loading 100M tarball into memory > >>> doesn't seem like a good idea. Which bootloader is running on your > >>> board? > >>> > >>> milosz > >>> > >>> On Tue, 12 Nov 2019 at 13:32, dhanu msys <dhanuskd.palnati(a)gmail.com> > wrote: > >>> > > >>> > Hi Milosz, > >>> > > >>> > As per earlier email , I am trying to boot the STM32mp157c-dk2 with > the tftp deploy method , but getting failed to have proper device > configuration. > >>> > > >>> > Here I have attached the device configuration , device template & > Job definition files. PFA. > >>> > > >>> > Please let me know how to get resolve the issue. > >>> > > >>> > Regards, > >>> > Dhanunjaya. P > >>> > > >>> > > >>> > On Tue, Nov 12, 2019 at 2:45 PM Milosz Wasilewski < > milosz.wasilewski(a)linaro.org> wrote: > >>> >> > >>> >> On Tue, 12 Nov 2019 at 08:14, dhanu msys < > dhanuskd.palnati(a)gmail.com> wrote: > >>> >> > > >>> >> > Hi Milosz, > >>> >> > > >>> >> > Currently eth008 was unavailable, Is there any possibility to > make use of Raspberry pi 4 as PDU to run power control commands on > STM32mp157c-dk2 ? > >>> >> > >>> >> Sure. Anything that can drive a relay will work. You will need to > >>> >> create a script that LAVA can call. Eth008 is a good choice for a > >>> >> bigger LAB where you need a lot of relays (these boards have > >>> >> configurable MAC addresses). If you need just one, than pick any > relay > >>> >> you can get on ebay and that will do the trick. > >>> >> > >>> >> milosz > >>> >> > >>> >> > > >>> >> > Thanks in advance. > >>> >> > > >>> >> > Regards, > >>> >> > Dhanunjaya. P > >>> >> > > >>> >> > > >>> >> > On Mon, Nov 11, 2019 at 5:36 PM dhanu msys < > dhanuskd.palnati(a)gmail.com> wrote: > >>> >> >> > >>> >> >> Hi Milosz, > >>> >> >> > >>> >> >> Thanks for the reply. > >>> >> >> > >>> >> >> I will try to get the eth008 if possible , otherwise i will try > to make use of TFTP or u-boot methods to run the test job on > STM32mp157c-dk2. > >>> >> >> > >>> >> >> Thanks & Regards, > >>> >> >> Dhanunjaya. P > >>> >> >> > >>> >> >> > >>> >> >> On Mon, Nov 11, 2019 at 4:57 PM Milosz Wasilewski < > milosz.wasilewski(a)linaro.org> wrote: > >>> >> >>> > >>> >> >>> On Mon, 11 Nov 2019 at 11:07, dhanu msys < > dhanuskd.palnati(a)gmail.com> wrote: > >>> >> >>> > > >>> >> >>> > Hi Milosz, > >>> >> >>> > > >>> >> >>> > Really Thanks for sharing the Information. > >>> >> >>> > > >>> >> >>> > I have basic question, we can't able to run any test job for > the STM32 without external hardware(PDU) ? > >>> >> >>> > > >>> >> >>> > Can you please share the device configuration , which helps > to run the test jobs without "ethernet controlled relay" for the STM32. > >>> >> >>> > >>> >> >>> > https://git.linaro.org/lava/lava-lab.git/tree/shared/lab-scripts/eth008_con… > >>> >> >>> > >>> >> >>> > > >>> >> >>> > As I requested earlier , is there any possibility to run the > STM32 specific jobs with any other deployment methods(tmpfs , tftp..etc). > >>> >> >>> > >>> >> >>> Our boards use EFI for booting and I never tried tftp with > that. You > >>> >> >>> might need grub EFI application for that. Alternatively you > might use > >>> >> >>> u-boot. I didn't try that either. > >>> >> >>> > >>> >> >>> milosz > >>> >> >>> > >>> >> >>> > > >>> >> >>> > Thanks & Regards, > >>> >> >>> > Dhanunjaya. P > >>> >> >>> > > >>> >> >>> > > >>> >> >>> > On Mon, Nov 11, 2019 at 4:19 PM Milosz Wasilewski < > milosz.wasilewski(a)linaro.org> wrote: > >>> >> >>> >> > >>> >> >>> >> Well, LAVA will try to switch the device into DFU mode for > deployment > >>> >> >>> >> step. These lines in the device dict do it: > >>> >> >>> >> '/usr/local/lab-scripts/eth008_control -a 172.27.19.27 -r 1 > -s on', > >>> >> >>> >> '/usr/local/lab-scripts/eth008_control -a 172.27.19.27 -r 2 > -s on', > >>> >> >>> >> Then it will power on the board: > >>> >> >>> >> '/usr/local/lab-scripts/snmp_pdu_control --hostname lngpdu01 > --command > >>> >> >>> >> on --port 3 --delay 20', > >>> >> >>> >> After that it will try to flash it using the > STM32_Programmer_CLI: > >>> >> >>> >> '/usr/local/bin/STM32_Programmer_CLI -c port=usb1 -w > {LAYOUT} -q', > >>> >> >>> >> Lastly it will power the board down and flip the dip > switches back: > >>> >> >>> >> '/usr/local/lab-scripts/snmp_pdu_control --hostname lngpdu01 > --command > >>> >> >>> >> off --port 3', > >>> >> >>> >> '/usr/local/lab-scripts/eth008_control -a 172.27.19.27 -r 1 > -s off', > >>> >> >>> >> '/usr/local/lab-scripts/eth008_control -a 172.27.19.27 -r 2 > -s off', > >>> >> >>> >> > >>> >> >>> >> So if you don't have HW moded board, this device dict won't > work for > >>> >> >>> >> you. Sources for the scripts are here: > >>> >> >>> >> > https://git.linaro.org/lava/lava-lab.git/tree/shared/lab-scripts > >>> >> >>> >> We're using pretty expensive HW in the LAB: > >>> >> >>> >> - managed APC PDUs: > >>> >> >>> >> > https://www.apc.com/shop/uk/en/products/Rack-PDU-Switched-1U-16A-208-230V-8… > >>> >> >>> >> (I couldn't find the exact models we have, they're > discontinued) > >>> >> >>> >> - ETH008 relay board: > https://www.robot-electronics.co.uk/htm/eth008tech.htm > >>> >> >>> >> > >>> >> >>> >> milosz > >>> >> >>> >> > >>> >> >>> >> On Mon, 11 Nov 2019 at 10:42, dhanu msys < > dhanuskd.palnati(a)gmail.com> wrote: > >>> >> >>> >> > > >>> >> >>> >> > Hi Milosz, > >>> >> >>> >> > > >>> >> >>> >> > No. > >>> >> >>> >> > Through Manual Setup , we are able to switch between the > modes. > >>> >> >>> >> > > >>> >> >>> >> > Here I have attached the kernel & dtb image for your > reference. PFA. > >>> >> >>> >> > > >>> >> >>> >> > Dhanunjaya. P > >>> >> >>> >> > > >>> >> >>> >> > > >>> >> >>> >> > On Mon, Nov 11, 2019 at 3:40 PM Milosz Wasilewski < > milosz.wasilewski(a)linaro.org> wrote: > >>> >> >>> >> >> > >>> >> >>> >> >> I think I forgot to ask key question when it comes to > this device: did > >>> >> >>> >> >> you do the HW mod to be able to switch between DFU and OS > boot modes > >>> >> >>> >> >> without manual step? > >>> >> >>> >> >> > >>> >> >>> >> >> milosz > >>> >> >>> >> >> > >>> >> >>> >> >> On Mon, 11 Nov 2019 at 10:01, dhanu msys < > dhanuskd.palnati(a)gmail.com> wrote: > >>> >> >>> >> >> > > >>> >> >>> >> >> > Hi Milosz, > >>> >> >>> >> >> > > >>> >> >>> >> >> > Thanks for reply. > >>> >> >>> >> >> > > >>> >> >>> >> >> > I am new to the LAVA usage. > >>> >> >>> >> >> > > >>> >> >>> >> >> > I have taken reference from the below link. > >>> >> >>> >> >> > > https://staging.validation.linaro.org/scheduler/device/staging-stm32mp157-0… > >>> >> >>> >> >> > > >>> >> >>> >> >> > Here I have attached the device_dictionary & device > configurations files, PFA. > >>> >> >>> >> >> > > >>> >> >>> >> >> > Note : I am not able to see the "lab-scripts" to have > power controlled commands in my local repository , is there any specific > package need to install in my localhost , can you please share the > lab-scripts to have pdu control and also please share the pdu device > details if required to connect with the hardware. > >>> >> >>> >> >> > > >>> >> >>> >> >> > Can you please share some references , which i can run > some jobs through any other deploy methods like "tmpfs , tftp " for > "STM32MP157C-DK2". > >>> >> >>> >> >> > > >>> >> >>> >> >> > Thanks & Regards, > >>> >> >>> >> >> > Dhanunjaya. P > >>> >> >>> >> >> > > >>> >> >>> >> >> > > >>> >> >>> >> >> > On Mon, Nov 11, 2019 at 2:59 PM Milosz Wasilewski < > milosz.wasilewski(a)linaro.org> wrote: > >>> >> >>> >> >> >> > >>> >> >>> >> >> >> Could you share your device dictionary? You might be > missing > >>> >> >>> >> >> >> flasher_deploy_commands. > >>> >> >>> >> >> >> > >>> >> >>> >> >> >> Please check here for reference: > >>> >> >>> >> >> >> > https://ledge.validation.linaro.org/scheduler/device/lng-stm32mp157-01/devi… > >>> >> >>> >> >> >> > >>> >> >>> >> >> >> milosz > >>> >> >>> >> >> >> > >>> >> >>> >> >> >> On Thu, 7 Nov 2019 at 07:48, dhanu msys < > dhanuskd.palnati(a)gmail.com> wrote: > >>> >> >>> >> >> >> > > >>> >> >>> >> >> >> > Hi Team, > >>> >> >>> >> >> >> > > >>> >> >>> >> >> >> > I am trying to run the test_jobs on the specific > device type "stm32mp1157c-dk2" , but its throwing an error message to > deploy "flasher" method in the deployment parameters. > >>> >> >>> >> >> >> > > >>> >> >>> >> >> >> > Here I have attached the screenshots for reference. > PFA. > >>> >> >>> >> >> >> > > >>> >> >>> >> >> >> > Thanks & Regards, > >>> >> >>> >> >> >> > Dhanunjaya. P > >>> >> >>> >> >> >> > _______________________________________________ > >>> >> >>> >> >> >> > Lava-users mailing list > >>> >> >>> >> >> >> > Lava-users(a)lists.lavasoftware.org > >>> >> >>> >> >> >> > > https://lists.lavasoftware.org/mailman/listinfo/lava-users >

5 years, 6 months

Re: [Lava-users] lxc creation fails with multiple containers

by Diego Russo

An update: as soon as I kll the rsync processes, all the lxc and flock processes get terminated. Before the killing I did try to create a lxc container from the command line but it was stuck. It continued after killing the rsync processes. How can I avoid this situation? Cheers -----Original Message----- From: Lava-users <lava-users-bounces(a)lists.lavasoftware.org> on behalf of Diego Russo <Diego.Russo(a)arm.com> Date: Tuesday, 26 November 2019 at 11:17 To: "lava-users(a)lists.lavasoftware.org" <lava-users(a)lists.lavasoftware.org> Subject: [Lava-users] lxc creation fails with multiple containers Hello, Sometimes LAVA slaves end up in a funky state where all jobs will be failing for the lxc-creation. This is an just a section of the pstree but actually the machine is not doing anything. No CPU/IO/memory usage at all. |-lxc-ubuntu,26488 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/mbl-rpi3-healthcheck-lxc-86216 --name=mbl-rpi3-healthcheck-lxc-86216 --rootfs=/var/lib/lxc/mbl-rpi3-healthcheck-lxc-86216/rootfs --release xenial ... | `-lxc-ubuntu,26495 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/mbl-rpi3-healthcheck-lxc-86216 --name=mbl-rpi3-healthcheck-lxc-86216 --rootfs=/var/lib/lxc/mbl-rpi3-healthcheck-lxc-86216/rootfs --release xenial ... | `-flock,26496 -x 9 |-lxc-ubuntu,29367 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/cellular-wifi-lxc-85573 --name=cellular-wifi-lxc-85573 --rootfs=/var/lib/lxc/cellular-wifi-lxc-85573/rootfs --release xenial --packages ... | `-lxc-ubuntu,29374 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/cellular-wifi-lxc-85573 --name=cellular-wifi-lxc-85573 --rootfs=/var/lib/lxc/cellular-wifi-lxc-85573/rootfs --release xenial --packages ... | `-rsync,29590 -Ha /var/cache/lxc/xenial/rootfs-amd64/ /var/lib/lxc/cellular-wifi-lxc-85573/rootfs/ | `-rsync,29593 -Ha /var/cache/lxc/xenial/rootfs-amd64/ /var/lib/lxc/cellular-wifi-lxc-85573/rootfs/ | `-rsync,29594 -Ha /var/cache/lxc/xenial/rootfs-amd64/ /var/lib/lxc/cellular-wifi-lxc-85573/rootfs/ |-lxc-ubuntu,30173 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/multi_component-image-update-pelion-lxc-85584 --name=multi_component-image-update-pelion-lxc-85584... | `-lxc-ubuntu,30186 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/multi_component-image-update-pelion-lxc-85584 --name=multi_component-image-update-pelion-lxc-85584... | `-flock,30187 -x 9 |-lxc-ubuntu,30226 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/helloworld-update-lxc-85537 --name=helloworld-update-lxc-85537 --rootfs=/var/lib/lxc/helloworld-update-lxc-85537/rootfs --release xenial --packages ... | `-lxc-ubuntu,30233 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/helloworld-update-lxc-85537 --name=helloworld-update-lxc-85537 --rootfs=/var/lib/lxc/helloworld-update-lxc-85537/rootfs --release xenial --packages ... | `-flock,30234 -x 9 |-lxc-ubuntu,30800 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/rootfs-image-update-mbl-cli-lxc-85588 --name=rootfs-image-update-mbl-cli-lxc-85588 --rootfs=/var/lib/lxc/rootfs-image-update-mbl-cli-lxc-85588/rootfs ... | `-lxc-ubuntu,30807 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/rootfs-image-update-mbl-cli-lxc-85588 --name=rootfs-image-update-mbl-cli-lxc-85588 --rootfs=/var/lib/lxc/rootfs-image-update-mbl-cli-lxc-85588/rootfs ... | `-flock,30808 -x 9 |-lxc-ubuntu,30837 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/mbl-cli-basic-commands-lxc-85540 --name=mbl-cli-basic-commands-lxc-85540 --rootfs=/var/lib/lxc/mbl-cli-basic-commands-lxc-85540/rootfs --release xenial ... | `-lxc-ubuntu,30844 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/mbl-cli-basic-commands-lxc-85540 --name=mbl-cli-basic-commands-lxc-85540 --rootfs=/var/lib/lxc/mbl-cli-basic-commands-lxc-85540/rootfs --release xenial ... | `-flock,30845 -x 9 |-lxc-ubuntu,31697 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/wifi-access-lxc-85591 --name=wifi-access-lxc-85591 --rootfs=/var/lib/lxc/wifi-access-lxc-85591/rootfs --release xenial --packages systemd,systemd-sysv | `-lxc-ubuntu,31704 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/wifi-access-lxc-85591 --name=wifi-access-lxc-85591 --rootfs=/var/lib/lxc/wifi-access-lxc-85591/rootfs --release xenial --packages systemd,systemd-sysv | `-flock,31705 -x 9 |-lxc-ubuntu,31800 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/multi_component-image-update-mbl-cli-lxc-85542 --name=multi_component-image-update-mbl-cli-lxc-85542... | `-lxc-ubuntu,31807 /usr/share/lxc/templates/lxc-ubuntu --path=/var/lib/lxc/multi_component-image-update-mbl-cli-lxc-85542 --name=multi_component-image-update-mbl-cli-lxc-85542... | `-flock,31808 -x 9 I have tens and tens of this processes. LAVA jobs have failed but lxc processes are still there. It seems to be some sort of deadlock in the lxc world. I'm on Debian stretch 9.8. It recently started with no apparent reason. Regards -- Diego Russo | Staff Software Engineer | Mbed Linux OS ARM Ltd. CPC1, Capital Park, Cambridge Road, Fulbourn, CB21 5XE, United Kingdom http://www.diegor.co.uk - https://os.mbed.com/docs/mbed-linux-os/ IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. _______________________________________________ Lava-users mailing list Lava-users(a)lists.lavasoftware.org https://lists.lavasoftware.org/mailman/listinfo/lava-users IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

5 years, 7 months

LAVA master

by 宿川

Hi all, We upgraded our LAVA master to 2019.11 (2019.11 + stretch) version , but when queried devices owned by current user , it listed all devices hooked to this master, can anybody help check it? Regards, Su Chuan

5 years, 7 months

LXC connection LTP Issue

by Ilya Fedusiv

Hi! Have some issues with recognition of ltp test end point. After receiving message of the ltp's execution finish, job is still running and waiting with line : Listened to connection for namespace 'tlxc' done until get timeout. Also sometimes job runs good without that stuck. All scripts to run ltp were taken from lava's repo, without any changes. Just edit skipfile Here is end of log with stuck ltp https://pastebin.com/1qJAbxTJ Here is end of log with successful ltp recognition. https://pastebin.com/BnFyq5dU Here is test part of the job. https://pastebin.com/m6vAWkZ9 Ilya

5 years, 7 months

LAVA Lab System Specifications

by dhanu msys

Hi Team, Now I have experienced by running some of test jobs on LAVA Setup , really lava-mailing-lists helps a lot to solve problems & providing suggestions at earliest. Now We are planning to have LAVA Lab Setup with minimum 30 to 40 devices connected to the PDU to run automation test jobs. So , at initial we wants to know the LAVA Server Specifications more in detail , like RAM etc.. to setup the LAVA Lab. Regards, Dhanunjaya. P

5 years, 7 months

LAVA Web Interface access in intranet

by dhanu msys

Hi Team, I am able to access the web interface(WEB GUI) through localhost. Is there any specific configuration required to access the web ui within the intranet. Here I have shared the server.conf & instance.conf ( /etc/lava-server/ )files, please let me know the configuration changes if required? Dhanunjaya. P

5 years, 7 months

Re: [Lava-users] [Automated-testing] ELC followup / Search for a testing framework for small distribution tests on device

by Milosz Wasilewski

On Tue, 12 Nov 2019 at 16:49, Westermann, Oliver <Oliver.Westermann(a)cognex.com> wrote: > > Hey everyone, > > I recently joined the ELC in Lyon and had a good chat with a few who may read this list. Only during the ELC I leaned about the automated testing summit and if I had not planned the next days already, I would probably have joined. During the interesting talks and some networking I also learned about this list, so I now have to ask a bunch of questions in the hope for answers ;-) > > We (as in the company I work for) moved to linux for our embedded devices quite some time ago, but our testing hasn't. We have a test system for our full product, but due to the nature of the product ("cameras with intelligence"), there is a lot of implied requirements on the state of the device, which makes testing expensive (in terms of device- and setuptime), which results in only one, but very thorough test loop a day. > > We're now trying to check our options to setup a smaller on-device test-stage before this setup. We would like to test features we would consider "distribution features": Network connectivity, IO features, updates and more. Most devs have their small scripts to do one thing or another, but we would prefer to distribute something that allows us to share all this and run it as part of the CI chain. > > So I've looked into some of the pages on the Automated_Testing page of the elinux wiki and dove into a few of the frameworks, but actually I'm even more confused by LAVA, fuego and all the other tools than before. We already have a build system, we already have a CI system controlling build system. So I'm writing to you in an attempt to get a feeling for whats there and where we can contribute, and I will try to list some of our goal and ideas so maybe someone can throw me some good links (and hopefully, we can > > What we would like: > We would like to run simple tests (execute eg python & bash script) and validate the outputs > We would like to bring devices into a certain state, eg by an upgrade (we use sth with swupdate beneath) As LAVA co-maintainer I'm obviously biased but I think this tool can do what you need. LAVA doesn't do any building it expects build artifacts to be available for download. It can deliver software to your device (aka deployment step) and drive your device to run some tests. If you could give some more details about the device (how to deploy software to it, how to connect to console, etc.) I can probably suggest next step with LAVA. milosz > > Since I assume a lot of you have a better overview about whats out there, what sounds like our needs and where you think we could contribute, let me know :-) > > Best regards and thanks to all of those who gave talks at OSS and ELC, it was a very cool (and overwhelming) time :-) > > - Olli > > > -- > _______________________________________________ > automated-testing mailing list > automated-testing(a)yoctoproject.org > https://lists.yoctoproject.org/listinfo/automated-testing

5 years, 7 months

Re: [Lava-users] dispatcher_config not parsed

by Remi Duraffort

Hello, I said "lava-master" and not "lava-server". Le mar. 19 nov. 2019 à 11:56, Klaas Schulze-Dieckhoff < K.Schulze-Dieckhoff(a)sonnen.de> a écrit : > Hello Remi, > > > > yes it is visible, the first command-line output I showed in the original > message was from inside the lava-server container. I also played around > with the ownership of the file since it is a problem for devices/* and > health-check/* files (they must be lavaserver:lavaserver). But this didn’t > help… > > > > Thanks > > Klaas > > > > *Von:* Remi Duraffort <remi.duraffort(a)linaro.org> > *Gesendet:* Dienstag, 19. November 2019 11:09 > *An:* Klaas Schulze-Dieckhoff <K.Schulze-Dieckhoff(a)sonnen.de> > *Cc:* lava-users(a)lists.lavasoftware.org > *Betreff:* Re: [Lava-users] dispatcher_config not parsed > > > > Hello, > > > > is the configuration file > (/etc/lava-server/dispatcher.d/<hostname>/dispatcher.yaml) visible from the > master container? > > > > In the docker-compose setup, each service is running in a specific > container so the configuration files should be set carefully. > > > > > > Rgds > > > > Le mar. 19 nov. 2019 à 09:25, Klaas Schulze-Dieckhoff < > K.Schulze-Dieckhoff(a)sonnen.de> a écrit : > > Hi all, > > > > I am running lava using docker-compose. Additional to the official > docker-compose.yaml I added and FTP and NFS container. For testing my setup > I am trying to test a beaglebone black. > > In order to load dtb and kernel uboot needs to know the IP of the FTP / > NFS server. I added the IP in the following two ways: > > > > server: > > root@1a010c2f736b:/# cat > /etc/lava-server/dispatcher.d/lava-dispatcher.yaml > > dispatcher_ip: <server ip addr> > > > > dispatcher: > > root@075e2deb4c34:/# cat /etc/lava-dispatcher/lava-slave > > [....] > > NFS_SERVER_IP="<server-ip-addr> " > > > > The hostname of the dispatcher is `lava-dispatcher`. But, when the > health-check is running it will always run `setenv serverip > <ip-of-docker-container>. > > I also tried various variants of setting the dispatcher configuration > (./dispatcher.d/<hostname>/dispatcher.yaml, > ./dispatcher.d/<hostname>/env.yaml). No matter what I do lava persists to > take the IP of the docker-container. > > > > According to ` server/management/commands/lava-master.py` line 465 at > least one of the variants should word, > > > > I would appreciate some hints how to fix this! > > > > Thanks > Klaas > > > > Geschäftsführer: Christoph Ostermann (CEO), Oliver Koch, Steffen > Schneider, Hermann Schweizer, Tim Ulbricht. > Amtsgericht Kempten/Allgäu, Registernummer: 10655, Steuernummer > 127/137/50792, USt.-IdNr. DE272208908 > > _______________________________________________ > Lava-users mailing list > Lava-users(a)lists.lavasoftware.org > https://lists.lavasoftware.org/mailman/listinfo/lava-users > > > > > -- > > Rémi Duraffort > > LAVA Architect > > Linaro > > Geschäftsführer: Christoph Ostermann (CEO), Oliver Koch, Steffen > Schneider, Hermann Schweizer, Tim Ulbricht. > Amtsgericht Kempten/Allgäu, Registernummer: 10655, Steuernummer > 127/137/50792, USt.-IdNr. DE272208908 > -- Rémi Duraffort LAVA Architect Linaro

5 years, 7 months

dispatcher_config not parsed

by Klaas Schulze-Dieckhoff

Hi all, I am running lava using docker-compose. Additional to the official docker-compose.yaml I added and FTP and NFS container. For testing my setup I am trying to test a beaglebone black. In order to load dtb and kernel uboot needs to know the IP of the FTP / NFS server. I added the IP in the following two ways: server: root@1a010c2f736b:/# cat /etc/lava-server/dispatcher.d/lava-dispatcher.yaml dispatcher_ip: <server ip addr> dispatcher: root@075e2deb4c34:/# cat /etc/lava-dispatcher/lava-slave [....] NFS_SERVER_IP="<server-ip-addr> " The hostname of the dispatcher is `lava-dispatcher`. But, when the health-check is running it will always run `setenv serverip <ip-of-docker-container>. I also tried various variants of setting the dispatcher configuration (./dispatcher.d/<hostname>/dispatcher.yaml, ./dispatcher.d/<hostname>/env.yaml). No matter what I do lava persists to take the IP of the docker-container. According to ` server/management/commands/lava-master.py` line 465 at least one of the variants should word, I would appreciate some hints how to fix this! Thanks Klaas Gesch?ftsf?hrer: Christoph Ostermann (CEO), Oliver Koch, Steffen Schneider, Hermann Schweizer, Tim Ulbricht. Amtsgericht Kempten/Allg?u, Registernummer: 10655, Steuernummer 127/137/50792, USt.-IdNr. DE272208908

5 years, 7 months

← Newer
1
...
31
32
33
34
35
36
37
...
93
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

lava-users