lava-users

lava-users@lists.lavasoftware.org

3 participants
925 discussions

docker-compose: how to administrate a LAVA master from this?

by Philippe Mazet (OSS)

Hi, I am looking into https://git.lavasoftware.org/lava/pkg/docker-compose I have few questions about it: * Are there guidelines somewhere about how to administrate a "master only" instance run from this docker-compose? Like tutorials about creating/restoring a backup, periodic maintenance/cleanup, restart one of the containers idenpendantly, upgrade versions, etc... * Is there an easy way to inject a backup created from a previous instance? (backup created with pg_dump. Note that I am not psql expert at all...) * Is LAVA coordinator supported in this docker solution ? Many thanks, Philippe

5 years, 1 month

test

by Remi Duraffort

Hello, please skip this message. -- Rémi Duraffort LAVA Architect Linaro

5 years, 1 month

LTP included rootfs.cpio file for Qualcomm Snapdragon (arm64) series

by koti koti

Hi, I am looking for the LTP test suite included(inbuild) rootfs.cpio file for the Qualcomm Snapdragon (arm64) seris. Please can some one let me know as where can I find this .cpio file in Linaro's prebuild releases? Regards, Koti

5 years, 1 month

Re: [Lava-users] Evaluating return value of user_commands

by Tim Jaacks

Oh, the action indeed DOES cause an infrastructure error if it fails, my command simply did not return an error in case of a failure. Sorry for the noise! Mit freundlichen Grüßen / Best regards Tim Jaacks DEVELOPMENT ENGINEER Garz & Fricke GmbH Schlachthofstrasse 20 21079 Hamburg Direct: +49 40 791 899 - 183 Fax: +49 40 791899 - 39 tim.jaacks(a)garz-fricke.com www.garz-fricke.com WE MAKE IT YOURS! Sitz der Gesellschaft: D-21079 Hamburg Registergericht: Amtsgericht Hamburg, HRB 60514 Geschäftsführer: Matthias Fricke, Manfred Garz, Marc-Michael Braun -----Ursprüngliche Nachricht----- Von: Tim Jaacks Gesendet: Donnerstag, 30. April 2020 16:32 An: lava-users(a)lists.lavasoftware.org Betreff: Evaluating return value of user_commands Hello everyone, I am using a command action with pre-defined user_commands in the device dictionary for switching relays, as described here: https://master.lavasoftware.org/static/docs/v2/actions-command.html The return value does not seem to be evaluated, though. The test continues even if my user_command fails. I would assume that this causes an infrastructure failure, resulting in an incomplete job. Why is this not the case? Mit freundlichen Grüßen / Best regards Tim Jaacks DEVELOPMENT ENGINEER Garz & Fricke GmbH Schlachthofstrasse 20 21079 Hamburg Direct: +49 40 791 899 - 183 Fax: +49 40 791899 - 39 tim.jaacks(a)garz-fricke.com www.garz-fricke.com WE MAKE IT YOURS! Sitz der Gesellschaft: D-21079 Hamburg Registergericht: Amtsgericht Hamburg, HRB 60514 Geschäftsführer: Matthias Fricke, Manfred Garz, Marc-Michael Braun

5 years, 1 month

Evaluating return value of user_commands

by Tim Jaacks

Hello everyone, I am using a command action with pre-defined user_commands in the device dictionary for switching relays, as described here: https://master.lavasoftware.org/static/docs/v2/actions-command.html The return value does not seem to be evaluated, though. The test continues even if my user_command fails. I would assume that this causes an infrastructure failure, resulting in an incomplete job. Why is this not the case? Mit freundlichen Grüßen / Best regards Tim Jaacks DEVELOPMENT ENGINEER Garz & Fricke GmbH Schlachthofstrasse 20 21079 Hamburg Direct: +49 40 791 899 - 183 Fax: +49 40 791899 - 39 tim.jaacks(a)garz-fricke.com www.garz-fricke.com WE MAKE IT YOURS! Sitz der Gesellschaft: D-21079 Hamburg Registergericht: Amtsgericht Hamburg, HRB 60514 Geschäftsführer: Matthias Fricke, Manfred Garz, Marc-Michael Braun

5 years, 1 month

Unable to register IRC channel for #linaro-lava

by Nagendra Singamsetti

Hi team, i am trying to login IRC channel for #linaro-lava. https://webchat.freenode.net/#linaro-lava But , There is no register option for new user. It takes me to the group as Unregistered user. Please share the proper link to complete the registration for #linaro-lava. thanks Regards Nagendra S

5 years, 1 month

/etc/qemu-ifup: no bridge for guest interface found

by Nagendra Singamsetti

Hi team, I am new to lava-server. I have written and uploaded the job description for QEMU-arm64 to boot. But I can see in logs both kerenl Image-qemuarm64.bin and rootfs core-image-minimal-qemuarm64.ext4 files are downloaded in /var/lib/lava/dispatcher/tmp/* directory. But i am getting following error . auto-login-action: Wait for prompt ['Linux version [0-9]'] (timeout 00:02:00) *W: /etc/qemu-ifup: no bridge for guest interface foundqemu-system-aarch64: -kernel /var/lib/lava/dispatcher/tmp/27/deployimages-otsvre77/kernel/Image-qemuarm64.bin: Could not open 'format=raw,file=/var/lib/lava/dispatcher/tmp/27/deployimages-otsvre77/rootfs/core-image-minimal-qemuarm64.ext4': No such file or directoryConnection closed* *Attaching .yaml file for job discription.* Please let me know if i miss anything. Note : LAVA-SERVER version:version: 2019.01-5 QEMU boot command:sudo qemu-system-aarch64 -kernel Image-qemuarm64.bin -netdev tap,id=net0,ifname=tap1,script=no,downscript=no -device virtio-net-device,netdev=net0 -machine virt -cpu cortex-a57 -drive id=disk0,file=core-image-minimal-qemuarm64.ext4,if=none,format=raw -device virtio-blk-device,drive=disk0 -no-reboot -nographic -m 512 --append "root=/dev/vda rw console=ttyAMA0,38400 mem=512M highres=off ip=192.168.7.4: :192.168.7.3:255.255.255.0 rootfstype=ext4 console=ttyS0" Tested and working fine on my debian machine(with out lava server) thanks Regards Nagendra S

5 years, 1 month

Support for lauterbach-trace32 debugger

by Nagendra Singamsetti

Hi Team, Hi Team, Thanks for giving kind support. We are booting *ARM-cortexM targets* using lauterbach - trace32 debugger. http://www.embeddedindia.com/lauterbach-gmbh.html I would like to know *lauterbach** -trace32 debugger support* in lava If support is available, Please share me the supported Device-type jinja file or share me the reference file. Please let me know anything required from my side. I am looking forward your kind support thanks Regards Nagendra S

5 years, 2 months

Default lava-slave went offline

by Nagendra Singamsetti

Hi Team, Today i have started working with remote worker. But In Lava-server Admin page i have noticed that default lava-worker went office where as remote worker operations are working fine as expected. 1. Is this expected behavior ?? On command prompt i can see lava-slave status as Online [image: default_worker_onserver_command_line showing_online.png] Where as On webpage it is showing offline: [image: default_worker_onserver_webpage_status_offline.png] The devices connected to default worker also showing offline. 2. Can we rename hostname for remote worker?? Thanks !! Regards Nagendra S

5 years, 2 months

Question about Docker feature for Android testing.

by Larry Shen

Hi, guys, I have a question after listen Docker feature for Android testing<https://linarotechdays.sched.com/event/ZZFc/ltd20-103-improved-android-test…>, and the question is a little long. 1. I want to say sorry that I haven't ever tried it on android because currently not urgent for us to switch from lxc to docker. But my real question is related to this feature at least I think. 2. The whole story is: We have a device which use the "tftpboot(deploy) -> nfs(boot) -> shell(test)" mode to test, that's ok. But now we have a team which for their testcases, they need to define other logic which behavior totally different with current lava solution. There is legacy code on pc which we want to reuse, so the quicker way for us is to use docker device, in it we could do anything to control the device. What we tried is: - Deploy (to: docker) - Boot (method: docker) - Test It's ok, as you see we could use the connection from boot in test. But as you know, not all device type accepts docker actions. Then, I find the option after you give the presentation in linaro tech share, use docker test. 3. I tried the v2020.02 release, it's ok to use next with any device type in our job to do my things. - test: docker: image: ubuntu:18.04 Although some android related log printed like "- ANDROID_SERIAL='xxx'", but I can bear. 4. Things broken when you improve this feature in v2020.04, you add next in pipeline: WaitDeviceBoardID(self.get_board_id() Then, the pipeline will have to wait for a udev event, but in our case, we don't have, we control device with "remote telnet device", then job hang. 5. So, my question here is: "What's the roadmap of this docker test action"? a) Is it just for android scenario? b) Why we can't make it works for more common scenario? My opinion here is: with this docker test action, we even no longer need the old "docker deploy + docker boot"? c) For this docker test, most of docker operation was written fixed in docker test, if possible to add in some place which user could configure? Like, if I want to add "-t", I can't control that although you define the interface in "DockerRun" with "def tty(self):", and others like more docker bind mounts etc? 6. BTW, a side question related to android (As definitely someday we need to switch from lxc to docker, I use this chance to ask the question). What will happened if there is adbd restart or pdu reboot in "docker test"? You add "-device" for the usb bus (I'm not sure, just think it same way as lxc), but during adbd restart or pdu reboot, the usb bus will surely changes. I didn't see docker has such kinds of ability to renew the "-device". How would that happen? Sorry again, I haven't tired, just want to know the mechanism. 7. Anyway, currently what I care about is the roadmap of "docker test". If your final direction is to make the "docker test" more common, then we are OK currently "STICK ON 2020.02". If just for android & "WaitDeviceBoardID" had to be here without any control by user, then we will give up this solution & try to find another way to reuse the device in LAVA? Your direction matters our next step! 8. Finally, Any other suggestion for our scenario which I described in item 2? Regards, Larry

5 years, 2 months

← Newer
1
...
25
26
27
28
29
30
31
...
93
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

lava-users