I suspect the auto-login action functionality. Please try to test by
avoiding auto-login functionality.
We can nail down/avoid the auto-login functionality issue like below.
Steps:
######
1. Boot the target manually and login
2. Make sure you will get login prompt
3. Run reset/reboot command
4. Check whether we will get to see the console log in the LAVA result
page.
Note:
1. You can use below "-boot" section
"
- boot:
timeout:
minutes: 2
method: minimal
soft_reboot: ["reset;pwd;reset"]
parameters:
shutdown-message: ["< Please mention shutdown message > "]
boot-message: [" < Please mention boot message "]
"
Send Lava-users mailing list submissions to
lava-users@lists.lavasoftware.org
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.lavasoftware.org/mailman/listinfo/lava-users
or, via email, send a message with subject or body 'help' to
lava-users-request@lists.lavasoftware.org
You can reach the person managing the list at
lava-users-owner@lists.lavasoftware.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Lava-users digest..."
Today's Topics:
- Unable to get kernel boot messages in to lava job while using
lava framework & telnet (Nagendra Singamsetti)
- Notify on finish does not hold duration (Westermann, Oliver)
Message: 1
Date: Thu, 22 Apr 2021 17:53:31 +0530
From: Nagendra Singamsetti nag.singam91@gmail.com
To: lava-users@lists.lavasoftware.org
Subject: [Lava-users] Unable to get kernel boot messages in to lava
job while using lava framework & telnet
Message-ID:
<CAFhg_Wste+2=zO51aA3GOq-BjwbUx76rms=
gF8Rv-hKNCOeQVQ@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Hi ,
I am trying to automate the linux boot functionality on my custom boards
using LAVA framework. Previously I have done it on Renesas board using LAVA
it works fine.I got linux boot messages on lava job whereas i am not
getting with customised board.
*Issue: *I am using trace32 debugger to flash images onto the board
(working fine). After that i am calling minimal method in pipeline job to
get prompt strings/login
But i am not getting the linux boot messages on the job. always stucks at
the following:
[common] connect-device Connecting to device using 'telnet 10.10.0.18 4000'
http://10.10.0.69/scheduler/job/789#L136Setting prompt string to
['lava-test: # '] http://10.10.0.69/scheduler/job/789#L137end: 2.3
connect-device (duration 00:00:00) [common]
http://10.10.0.69/scheduler/job/789#L138end: 2 boot-trace32-image
(duration 00:00:28) [common]
http://10.10.0.69/scheduler/job/789#action_3start:
3 minimal-boot (timeout 00:03:00) [common]
http://10.10.0.69/scheduler/job/789#action_3-1start: 3.1 connect-device
(timeout 00:03:00) [common] <http://10.10.0.69/scheduler/job/789#L141
Already
connected http://10.10.0.69/scheduler/job/789#L142end: 3.1
connect-device
(duration 00:00:00) [common]
http://10.10.0.69/scheduler/job/789#action_3-2start: 3.2
auto-login-action (timeout 00:03:00) [common]
http://10.10.0.69/scheduler/job/789#L144Setting prompt string to
['Booting Linux'] <http://10.10.0.69/scheduler/job/789#L145
auto-login-action:
Wait for prompt ['Booting Linux'] (timeout 00:03:00)
http://10.10.0.69/scheduler/job/789#L146Trying 10.10.0.18...
http://10.10.0.69/scheduler/job/789#L147Connected to 10.10.0.18.
http://10.10.0.69/scheduler/job/789#L148Escape character is '^]'.
http://10.10.0.69/scheduler/job/789#L149
http://10.10.0.69/scheduler/job/789#L150alif_asic01 4000 [115200 N81]
http://10.10.0.69/scheduler/job/789#L151
http://10.10.0.69/scheduler/job/789#L152auto-login-action timed out
after
180 seconds http://10.10.0.69/scheduler/job/789#L153end: 3.2
auto-login-action (duration 00:03:00) [common]
*Both telnet & serial server(ser2net) is configured.*
*Uart cable attached with serial server:
usb-Profolic_Technology_Inc._Usb-serial_Controller-ifoo-port0*
i am getting boot log messages using telnet manually but not with lava.
*Manual log with telnet:*
$ telnet 10.10.0.18 4000
Trying 10.10.0.18...
Connected to 10.10.0.18.
Escape character is '^]'.
alif_asic01 4000 [115200 N81]
Booting Linux on physical CPU 0x0
Linux version 5.4.25-00024-g9283a6810958-dirty (nishit@alif) (gcc version
9.2.0 (GCC)) #72 Tue Apr 20 15:41:31 IST 2021
#HGG1
CPU: ARMv8-a aarch32 Processor [411fd010] revision 0 (ARMv8), cr=50c5383d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
#HGG1.1
OF: fdt: Machine model: corstone700
[PFA] yaml job
thanks
Regards
Nagendra S
koti