lava-users

lava-users@lists.lavasoftware.org

3 participants
925 discussions

by Philippe Mazet (OSS)

Hi All, I was exploring the new lava-docker-worker released with 2020.09. It is pretty handy to start a slave, but I am wondering how to customize the slave image: I need to add inside my own tools (like uuu), config files (like ser2net.conf), and also install additional packages. How do you do this on your side? Finally, I noticed that if I don't do a "service tftpd-hpa restart", TFTP does not work. Is it a known issue? Thanks, Philippe Mazet

4 years, 7 months

Error while using uuu boot method

by DAS, BHARGAV

Hi Lava users, I am getting " Job error: Invalid job data: ['Unable to connect to shell - missing connections block.'] " error while submitting jobs which is using 'uuu' deploy and boot method. Same job I am using in a different server and there it is working perfectly. Both the servers are using same version. Please check the attached job yaml file (uuu-job.yaml) and the job log (uuu-job-fail-log.txt). Regards, Bhargav

4 years, 8 months

Job IMCOMPLETE for unknown reason

by Kever Yang

Hi For the same job, I may got 'complete'(for most case) and 'incomplete' in lava server dashboard, the logs are almost the same and both show that the job finished correctly and the result is pass. My question is: how is the server define the job as 'incomplete'? When I check the lava server log, I got the same error log for ALL 'complete' and 'incomplete' jobs(most of them are actually mark as complete in the dashboard result): 2020-10-10 09:40:58,386 DEBUG - rv1126-evb 2020-10-10 09:40:58,395 DEBUG -> rv1126-evb-01 (Idle, Unknown) 2020-10-10 09:40:58,395 DEBUG |--> [140442] scheduling 2020-10-10 09:40:58,486 INFO [140442] START => lava-slave247 (rv1126-evb-01) 2020-10-10 09:40:58,517 INFO [140442] lava-slave247 => START_OK 2020-10-10 09:41:09,539 DEBUG lava-logs => PING(20) 2020-10-10 09:41:13,537 INFO [140442] lava-slave247 => END (lava-run crashed, mark job as INCOMPLETE) 2020-10-10 09:41:13,759 ERROR [140442] Unable to dump 'description.yaml' 2020-10-10 09:41:13,759 ERROR [140442] Compressed data ended before the end-of-stream marker was reached Traceback (most recent call last): File "/usr/lib/python3/dist-packages/lava_server/management/commands/lava-master.py", line 312, in _handle_end description = lzma.decompress(compressed_description) File "/usr/lib/python3.5/lzma.py", line 340, in decompress raise LZMAError("Compressed data ended before the " _lzma.LZMAError: Compressed data ended before the end-of-stream marker was reached 2020-10-10 09:41:13,763 DEBUG lava-slave241 => PING(20) Thanks, - Kever

4 years, 8 months

LAVA: How to link Requirements/"Any web page" page URL's to LAVA test cases

by koti koti

Hi, How can I link the Requirement page (any web page) URL to LAVA test cases ? 1. I just want to see that web page URL in test case results page log after execution of test. Do I need to add that web page URL as metadata data in while writing the test definitions? Regards, Koti

4 years, 8 months

Re: [Lava-users] LAVA: How to link Requirements/"Any web page" page URL's to LAVA test cases

by koti koti

Hi, I guess we may need to include under "metadata:" in yaml file, right? is my understanding correct? so that we can see the same in "Details" section under the corresponding Job. (Ex: https://staging.validation.linaro.org/scheduler/job/280173 . Attached the screen shot) Example: ####### metadata: Testcase ID : TestCase_ID: xxxxx Requirement Path: Requirement_URL_Page : XXXXX Regards, Koti On Mon, 19 Oct 2020 at 15:05, koti koti via groups.io <kotisoftwaretest= gmail.com(a)groups.io> wrote: > Hi, > > How can I link the Requirement page (any web page) URL to LAVA test cases ? > > 1. I just want to see that web page URL in test case results page log after > execution of test. > > Do I need to add that web page URL as metadata data in while writing the > test definitions? > > Regards, > Koti > > > -=-=-=-=-=-=-=-=-=-=-=- > Groups.io Links: You receive all messages sent to this group. > View/Reply Online (#964): https://groups.io/g/kernelci/message/964 > Mute This Topic: https://groups.io/mt/77654665/4395798 > Group Owner: kernelci+owner(a)groups.io > Unsubscribe: https://groups.io/g/kernelci/unsub [ > kotisoftwaretest(a)gmail.com] > -=-=-=-=-=-=-=-=-=-=-=- > > >

4 years, 8 months

LAVA : relays and PDU's info for dragonboard-845 DUT in India

by koti koti

Hi, I have connected my Dragonboard-845 DUT to Lava Dispatcher (Dispatcher is "raspberry pi 4" SBC) Now I need to set up "Remote Power Control" and "Set target into Program mode" . Please can someone let me know the required hardware list like "Remote PDU (Remote Power Distribution)" and "Relays" units purchase URL's in India for below requirement. 1. Power ON/Power OFF/reboot the target from Lava Dispatcher. ( Hope this functionality may be fully filled by the PDU. Can some let me know low cost PDU's URLs with 2 outlets) 2. set target into Programing mode ( to flash the images) (Is this functionality can be done by any relays? if yes, Please can someone let me know the available relays URL's in India) Note: 1. I have found a couple of Relays URL's ( https://www.robot-electronics.co.uk/products/relay-modules/ethernet-relay/e…) . * But these are not available in India.* Regards, Koti

4 years, 8 months

Issues about XMLRPC & lavacli.

by Larry Shen

Hi, guys, We find an issue related to job submit: 1) One team use "lavacli" to submit request, and sometimes it will report next: 07-Sep-2020 16:37:35 Unable to connect: HTTPConnectionPool(host='lava-master.sw.nxp.com', port=80): Read timed out. (read timeout=20.0) Looks this error happens at next, what do you think about this issue? try: # Create the Transport object parsed_uri = urlparse(uri) transport = RequestsTransport( parsed_uri.scheme, config.get("proxy"), config.get("timeout", 20.0), config.get("verify_ssl_cert", True), ) # allow_none is True because the server does support it proxy = xmlrpc.client.ServerProxy(uri, allow_none=True, transport=transport) version = proxy.system.version() except (OSError, xmlrpc.client.Error) as exc: print("Unable to connect: %s" % exc2str(exc)) return 1 2) Another team write their own python code using XMLRPC to submit job, did something like next, it reports next: ERROR in XMLRPC.py:submitJob:63 msg: Failed to submit job, reason: <ProtocolError for chuan.su:chuan.su@lava-master.sw.nxp.com/RPC2: 502 Bad Gateway>! try: job_id = self.connection.scheduler.submit_job(job) self.logger.debug("Successed to submit job , job_id: %d, platform; %s!",job_id,platform) return job_id except Exception as e: self.logger.error("Failed to submit job, reason: %s!",str(e)) return None We are currently using lava server version 2020.08, guys told me in the past days, we also encountered similar, but with very low probability. But recently it becomes very high probability. I'd like to know if possible this will related to your changes to gunicorn eventlet? Or other possible reasons? Thanks, Larry

4 years, 8 months

Usb bus circulated issue for android.

by Larry Shen

Hi, guys, We found a blocking issue for android test, the story is next: 1. job #1 with device #1 is running for about 12 hours, during its run, it will restart the boards many times, then the usb path will e.g. start from /dev/bus/usb/003/001 to /dev/bus/usb/002, then /dev/bus/usb/003...... finally /dev/bus/usb/127. You know, the max number here will be 127, so, if device reset again, the number will back to 001. Adb devices in container 1: $ adb devices List of devices attached 040c41d4d72d7393 device 2. job #2 with device #2 starts run during the job #1 still running, then E.g. it will mknod /dev/bus/usb/003/016 to another docker-test-shell container, also cgroup privilege added. But as the /dev/bus/usb/003/016 was once used by job #1, and this node won't be deleted from docker-test-shell container. So, we find high probability the device #2 was seen in job #1's docker-test-shell container (Checked with adb devices). Now, adb devices in container 2: $adb devices List of devices attached After above, adb devices in container 1: $ adb devices List of devices attached 040c41d4d72d7393 device 23305a0a5c85d936 device This becomes a big issue for our parallel android test. In fact, in the old LXC days, we also find similar issues, so we made a workaround in our local: https://github.com/atline/lava-docker-slave/blob/66f15d9da88912fc929fef5213… In this patch, we also monitor "remove", ENV{ID_SERIAL_SHORT}, that is "if a usb leaved, let it delete the node". But, I don't know for which reasons, in current version(2020.08), now I can just monitor "remove" in udev, can't match "remove + ENV{ID_SERIAL_SHORT}" correctly. So, to make our local android run could work in a short time, we did a patch as next: # diff __init__.py.bak __init__.py 157,158c157,158 < "mkdir -p %s && mknod %s c %d %d || true" < % (os.path.dirname(node), node, major, minor), --- > "mkdir -p %s && rm -f %s/* && mknod %s c %d %d || true" > % (os.path.dirname(node), os.path.dirname(node), node, major, minor), Now, no issue happens in our side, but it looks this is somewhat not universal? So, I'm here to ask the question, have you ever found this issue? And what's your thought on this?

4 years, 9 months

U-boot reset Interactive test nethod

by DAS, BHARGAV

Hi Lava users, I am facing some issues while using the interactive test method, for testing u-boot reset function. In v2019.11 this worked perfectly but currently while using v2020.07 and this features seems to be broken. Or am I missing something here. Here detailed description of the issue: We are testing the u-boot reset command below is the snippet of the job definition ... ... ... - name: mmcinfo command: mmcinfo successes: - message: "Erase Group Size:" failures: - message: "Unknown command " error: "Unknown command " - name: reset command: reset successes: - message: "Hit any key to stop autoboot" failures: - message: "Unknown command " error: "Unknown command " So in v2019.11 once the "Hit any key to stop autoboot" string was matched the target switched off (check screenshot "reset-snippet-v2019-11.PNG"). But this is not working in v2020.07, after the success message is matched the target is not switched off (check screenshot "reset-snippet-v2020-07.PNG"). Regards, Bhargav

4 years, 9 months

About customize query in job page.

by Larry Shen

Hi, all, I want to do a job search with owner, E.g. in https://validation.linaro.org/scheduler/alljobs 's search box, I input next: owner_query=qa-reports-bot But, it return nothing to me, all jobs filtered out. I wonder what's the correct input in this search box for "Custom query text"? Regards, Larry

4 years, 9 months

← Newer
1
...
21
22
23
24
25
26
27
...
93
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

lava-users